Most Important Topics for SSC JE 2019-20
Hello friends, how are you? And how is your preparation for SSC JE 2019-20. I hope everyone is doing well. But this article for those people who have not yet understood what will they do, and how to get more numbers by reading less.
In this article, I will discuss the most important topics or questions for SSC JE 2019-20. So please read the article completely and start your last 20 days' preparation.
So this topic I will cover in two or three different articles. And if you want to watch our SSC JE 2019-20 series, then click the link and our SSC Je series(Hindi) all video without any of cost.
So here this article I will cover that – 1) Surveying,
2) Estimate,
3) Transportation,
4) Irrigation,
and 5) Irrigation
1) Surveying and Levelling:
In surveying, there are 12 chapters and 8
chapters are major and 4 minor. So I will analyse full depth step by step. Keep
reading ..
Year |
2009 |
2010 |
2011 |
2012 |
2013 |
2014 |
2015 |
2016 |
2017 |
Surveying |
06 |
06 |
06 |
10 |
12 |
10 |
09 |
10 |
10 |
Overview of surveying |
General classification of Survey, Scales, Principles of Surveying. |
Chain Survey |
Instruments of Chaining, Types of chains, arrows, tapes, ranging rod, Correction of errors. |
Compass Survey |
Whole circle bearing,Reduced bearing,Quadrantal bearing,Fore bearing,Back bearingConvert WCB to QB and FB to BB |
Levelling |
General terms and definition, Methods of levelling, line of collimation method, rise and fall method. |
Plane table |
Use of instrument, methods of plane table survey. |
Theodolite Survey |
Instruments and their description, Various mathematical problems. |
Curves |
Only mathematical problems. |
Contour Survey |
Method of contouring. |
Most Repeated Questions –
b) Lower level to higher
level
c) Part to whole
d) Whole to part. (SSC JE-2014,2013,2016,2017) Which
of the following scale is the smallest one?
a) 4 : 20000 b) 1 cm = 5000 m
c) 1 cm = 50 m d) RF = 1/500000 (SSC JE- 2012)
Or
When I can on a map represents
10m on the ground, the representative fraction of the scale?
a) 1/10000 b) 1/10
c) 1/100 d) 1/1000 (SSC JE 2015)
Or
Which one of the following is the
largest scale? (SSC JE 2017)
a) 1 : 500 b) 1 : 1000
c) 1 : 2500 d) 1 : 50000
Or
What is the representative
fraction for a scale of 10 cm = 20 km?
a) 1 cm = 2 km b) 1 cm = 20000 m
c) 1 : 2 d) 1 : 200000 (SSC JE 2017)
Rise and Fall Method
Line of Collimation.
The rise and fall method of
levelling is :
a) less accurate than the HI method.
b) is not suitable for levelling with tilting
levels. ( SSC JE 2004)
c) quicker and less tedious for a large number
of intermediate sights.
d) provides a check on the reduction of
intermediate levels.
The rise and fall method of
levelling provides a complete check on :
a) back sight b) intermediate sight
c) fore sight d) all the above.
(SSC JE 2009, 2016
Area Measurement |
Only mathematical problems. |
GPS |
Definition and uses |
Remote sensing |
Definition and uses. |
|
|
The ‘Scale plate’ of a theodolite
is: (SSC JE 2005)
a) The upper plate b) The lower plate
c) Both the above d) None of the above.
An anallatic lens is provided in a:
(SSC JE 2011)
a) Theodolite b) Tacheometer
c) Dumpy level d) Prismatic compass.
Theodolite is an instrument used
for measurement of:
a) Both horizontal and vertical angle
b) Distance only
c) Horizontal angle only (SSC JE 2012)
d) vertical angle only.
Detailed
plotting in plane table surveying is generally one by :
a) resection b) a both and d
c) traversing d) radiation. ( SSC JE 2012 )
Intersection method in plane
table surveying is most suitable for :
a) plains b) forest c) urban d) hill. ( SSC JE 2012 )
What is the purpose of
conducting the resection method in the plane table surveying?
a) to determine the location of an instrument.
b) to plot survey hilly region c) to survey the details d) to survey plain region. ( SSC JE 2017)
2) Estimation & Costing:
Year
|
2009
|
2010
|
2011
|
2012
|
2013
|
2014
|
2015
|
2016
|
2017
|
Estimate
|
00
|
00
|
04
|
06
|
05
|
08
|
06
|
07
|
08
|
Chapter Name |
Important Topics |
Overview of Estimate |
Definition, terms, Methods of the estimate, Measurement |
Building Estimate |
Centreline method, Short wall – Longwall method, Short estimate, bar-bending schedule |
Rate Analysis |
Definition, terms and preparing of rate analysis. |
Miscellaneous |
PWD, Contract management |
Most Repeated Questions –
1) The unit of measurement in per quintal for :
a) Collapsible gate
with rails
b) Rolling
shutters (SSC JE
2011)
c) Expanded metal
wire netting
d) Reinforcement
of RCC works.
2) The damp
the proof course is measured in :
a) length b) area (SSC JE 2011)
c) volume d) weight.
3) The measurement is NOT made in the square :
a) damp proof course
b) from works ( SSC JE 2012)
c) concrete Jeffries d) R.C. hajj
Method of Estimate –
The most reliable estimate is :
a) Plinth area
estimate
b) detailed
estimate (SSC
JE 2011,2014,2016)
c) preliminary
estimate
d) cube rate
estimate.
Which one of the following method is used for the
approximate estimate?
a) both central line
and short wall and longwall method
b) Central line method
c) Plinth area method (SSC
JE 2017)
d)Short wall and longwall method
3) Highway Engineering:-
Year |
2009 |
2010 |
2011 |
2012 |
2013 |
2014 |
2015 |
2016 |
2017 |
Highway |
01 |
02 |
07 |
02 |
03 |
02 |
04 |
03 |
03 |
Chapter |
Important Topics |
Highway Development |
Three road development Plan, Jayakar’s Recommendation |
Geometric Design |
Components of road, Camber, Curves, Mathematical Problems. |
Traffic Engineering |
Traffic signs & Traffic signals |
Surface Highway Materials |
Testing (CBR test, ductility test, Penetration test, Softening point, Flash and Fire point), Grade of bitumen. |
Pavement Design |
Joints of pavements, Layers of pavement. |
Highway Construction |
Coating(Tack coat, Prime coat, Seal coat) |
4) Irrigation Engineering:
Year |
2009 |
2010 |
2011 |
2012 |
2013 |
2014 |
2015 |
2016 |
2017 |
Irrigation |
00 |
00 |
04 |
01 |
02 |
02 |
02 |
02 |
02 |
Chapter |
Important Topics |
Hydrological Cycle |
Rain gauge |
Runoff and Hydrograph |
Runoff, Surface runoff, graph |
Floods |
Basic overview, definition |
Groundwater Hydrology |
Aquifer, Aquitard, Discharge. |
Canal Design |
Law and mathematical problems. |
Method of Irrigation |
Types of irrigation and their uses, advantages, disadvantages. |
Water Required of crops |
Duty, Delta, Base period, relation. |
0 Comments